Skip to content
Standard TPO

Standard TPO is used in mechanically attached and fully adhered roofing systems in new construction, reroofing and recover (retrofit) applications. It may also be used as flexible membrane flashings for walls, curbs, etc, when installing TPO membrane roofing systems. The system must be installed over acceptable roof insulation or other suitable substrate. See the Mule-Hide TPO Specifications Manual for complete specifications and details

Colors

System

TPO
  • Polyester-reinforced
  • Available in 4', 6', 8, 10', 12' and 16' widths by 100' length
  • 45, 60, 80 mil thickness
  • Fully adhered, mechanically attached and ballasted systems
  • Standard TPO is available in white, gray and tan. Additional membrane and accessory colors are available in the TPO Colorway - medium bronze, patina green, rock brown, slate gray, and terra cotta.
  • Most often installed as mechanically attached
  • Up to a 30 year system warranty available
  • All adhesives must be installed as a 2-sided contact adhesive
  • Pre-printed with lap lines and fastener spacing
  • Meets  UL Standards
  • Meets  C-UL Standards
  • Meets  FM Standards
  • Meets  CCMC Standards
  • Meets  Miami-Dade-County Standards
  • Meets  Florida-Building Standards
  • Meets  CRRC Standards
  • Meets  CA-Title-24 Standards
  • Meets  ICC-ES Standards

Documents

PDS Standard TPO Membranes
PDS TPO Systems-c Extra Membrane
SDS - Statement for Article Products

CCMC - Canadian Construction Materials Centre evaluation for TPO Systems
Florida Product Approval - TPO Systems
Florida Product Approval HVHZ - TPO Systems
ICC-ESR Report - Adhered and Mech. Attached EPDM Systems, TPO Systems & PVC Systems
ICC-ESR Report - Ballasted EPDM Systems and TPO Systems
Miami-Dade NOA - TPO Systems over Cement Wood Fiber
Miami-Dade NOA - TPO Systems over Concrete Deck
Miami-Dade NOA - TPO Systems over Gypsum
Miami-Dade NOA - TPO Systems over Light Weight Concrete
Miami-Dade NOA - TPO Systems over Steel Deck
Miami-Dade NOA - TPO Systems Recover applications
TDI - Texas Department of Insurance - TPO Systems & PVC Systems MA over wood
TDI - Texas Department of Insurance - TPO Systems MA over Steel Deck
TPO Membrane - EPD
UL - Impact resistance ratings for TPO Systems
UL - Overview of UL Listings for TPO Systems
UL - Summary of UL Listings for TPO Systems

All TPO Installation Videos
Custom Single-Ply Accessories Form
Eight Reasons to Choose a TPO System
Hail Coverage - Procedures and Requirements
Letter of Compliance Application- Photovoltaic Installation on Mule-Hide Warranted Roof
Mule-Hide Products Company Brochure
Procedure for Inclusion of Photovoltaic Anchor Flashings
Reduced Fastener Requirements for Uplift Ratings
Sell Sheet - 16-Foot Standard TPO Membrane
Single-Ply Roofing Accessories Guide
Tech Bulletin - Mechanically Fastened Splice Requirements
Tech Bulletin - Pactiv GreenGuard Insulation
Tech Bulletin - TPO Systems MA half sheet requirements
Tech Bulletin: TPO Systems Mechanically Attached Requirements
TPO Cross Reference Chart
TPO Metal Retrofit
TPO Pocket Guide
TPO Pocket Guide (Spanish)
TPO Systems Brochure

Design Enhancements - Single-Ply Membranes
Design Summary - TPO Fleece Back Systems 10 or 15 year Fully Adhered
Design Summary - TPO Systems 10 or 15 year Ballasted
Design Summary - TPO Systems 10 or 15 year Fully Adhered
Design Summary - TPO Systems 10 or 15 year Mechanically Attached
E-Z Residential (Single-Family) Warranty Application - Material Only
Warranty - Notice of Completion
Warranty Program Information - Heat Weld Systems

Details

BASE ATTACHMENT TPO- ALL -PURPOSE BAR
BASE ATTACHMENT WITH 6 inch RUSS
BASE ATTACHMENT WITH PLATES AND FASTENERS
DOOR THRESHOLD FLASHING
Rhinobond Base Attachment
RhinoBond Metal Retrofit for TPO
RhinoBond Metal Retrofit for TPO
RhinoBond Metal Retrofit for TPO
RhinoBond Metal Retrofit for TPO

2-PIECE OUTSIDE CORNER UNCURED EPDM
FIELD FABRICATED INSIDE CORNER FOR TPO
FIELD FABRICATED OUTSIDE CORNER FOR TPO
INSIDE CORNER - UNCURED EPDM
INSIDE CORNER FOR TPO
INSIDE CORNER USING RUSS FOR TPO
TPO UNIVERSAL CORNER - OUTSIDE CORNER

CURB FLASHING FOR TPO
CURB FLASHING WITH M-H ALL-PURPOSE BAR
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR FOR TPO
INSULATED PARAPET WALL WITH METAL COPING CAP FOR TPO
PARAPET WALL DETAIL - EXISTING COPING CAP FOR TPO
PARAPET WALL DETAIL - METAL COPING CAP FOR TPO
PARAPET/CURB FLASHING FOR EPDM

DRAIN FLASHING - TAPERED INSULATION DRAIN SUM SLOPE LESS THAN 3 inch TO 12 inch FOR TPO
DRAIN FLASHING W/TARGET (PAGE 1 OF 2)
DRAIN FLASHING W/TARGET (PAGE 2 OF 2)
DRAIN FLASHING WITH TARGET PANELS DRAIN SUMP SLOPE GREATER THAN 3 inch TO 12 inch FOR TPO
DRAIN FLASHING WITH TARGET PATCH FOR TPO
DUTCH GUTTER FOR EPDM AND TPO
GRAVEL STOP SCUPPER - TPO COATED METAL
INTERMITTENT WALL SCUPPER FOR EPDM
NEW METAL THROUGH-WALL SCUPPER WITH WHITE UNCURED EPDM FOR TPO
PREMANUFACTURED CONDUCTOR HEAD
RETROFIT DRAIN INSERT - COMPRESSION TYPE INSERT FOR TPO
ROOF DRAIN FOR EPDM AND TPO
THROUGH-WALL SCUPPER - TPO COATED METAL
THROUGH-WALL SCUPPER - TPO COATED METAL

EXPANSION JOINT - CURB FOR TPO
EXPANSION JOINT CURB WITH CLOSED CELL ROD
EXPANSION JOINT DETAIL
EXPANSION JOINT DETAILS
WALL EXPANSION JOINT
WALL EXPANSION JOINT

4" TRAY PROFILE
TRANSITION TO WALKWAY
WALKWAY PAVER FOR EPDM AND TPO

2 inch OR THICKER INSULATION ATTACHMENT - 8 FASTENERS PER 4ft X 8ft BOARD
Extruded Polystyrene Insulation Attachment Fastening Patterns
FM - 10 Field Fasteners per 4'x8' Board
FM - 12 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 16 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 17 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 6 Field Fasteners per 4'x8' Board
FM - 8 FIELD FASTENERS PER 4ft X 8ft BOARD PATTERN LAYOUT
FM - 8 Field Fasteners per 4'x8' Board
HELIX MAX FOAM ADHESIVE 12" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 4" RIBBON PATTERN
HELIX MAX FOAM ADHESIVE 6" RIBBON PATTERN
INSULATION ATTACHMENT - 12 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 16 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT - 17 FASTENERS PER 4ft X 8ft IN FIELD
INSULATION ATTACHMENT PATTERNS FOR MECHANICALLY ATTACHED SYSTEMS
Rhinobond Fastening Requirements

FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION A
FM CORNER/PERIMETER FASTENING ENHANCEMENTS - TPO OPTION B
PERIMETER ATTACHMENT - OPTION 1 - PERIMETER HALF SHEETS FOR TPO
PERIMETER ATTACHMENT - OPTION 2 - 10 inch RUSS STRIP ALTERNATE FOR TPO
PERIMETER SECUREMENT - 10 inch RUSS STRIP FOR EPDM
ROOF CORNER AND PERIMETER DETAIL
ROOF PERIMETER/CORNER CALCULATION ELEVATION DIFFERENCE 3ft OR LESS FOR TPO
ROOF PERIMETER/CORNER CALCULATION ELEVATION DIFFERENCE GREATER THAN 3ft FOR TPO
SHEET LAYOUT ON BUILDINGS WITH LARGE OPENINGS FOR TPO
SHEET LAYOUT ON BUILDINGS WITH OVERHANGS FOR TPO

FIELD FABRICATED PIPE FLASHING WITH BANDING CLAMP FOR TPO
FIELD FABRICATED PIPE FLASHING WITH SEAM TAPE FOR TPO
FIELD FABRICATED PIPE FLASHING WITH WHITE UNCURED EPDM
FIXED EQUIPMENT SUPPORT FOR TPO
HOT PIPE FLASHING WITH COLD SLEEVE FOR TPO
HOT PIPE FLASHING WITH COLD SLEEVE WITH UNCURED EPDM
I-BEAM SUPPORT FLASHING FOR TPO
LIGHTNING CABLE STRAP FOR TPO
LIGHTNING ROD BASE FOR TPO
LIGHTNING ROD DETAIL
LIGHTNING ROD WALL SUPPORT FOR TPO
MULTIPLE PIPE PENETRATION FOR TPO
PITCH PAN MEMBRANE COATED METAL FOR TPO
PREFABRICATED SQUARE TUBING WRAP FOR TPO
PRE-MOLDED PIPE BOOT - WHITE EPDM
PRE-MOLDED PIPE BOOT FOR TPO
SLEEPER DETAIL FOR TPO
TPO MOLDED SEALANT POCKET
WHITE EPDM PREFABRICATED SEALANT POCKET
WOOD SLEEPER FOR TPO

ALL-PURPOSE BAR - EDGE TERMINATION FOR TPO
ANCHOR-TITE FASCIA SYSTEM BY METAL-ERA, INC
DRIP EDGE - TPO PS COVER STRIP
DRIP EDGE - WHITE EPDM CURED COVER TAPE FOR TPO
DRIP EDGE TPO COATED METAL
EDGE TERMINATION - ALL-PURPOSE BAR FOR TPO
FASCIA / DRIP EDGE SYSTEM FOR TPO
GRAVEL STOP - TPO COATED METAL - OPTION 1
GRAVEL STOP - TPO COATED METAL - OPTION 2
GRAVEL STOP JOINT DETAIL - TPO COATED METAL
GUTTER / TERMINATION BAR - RECOVER FOR TPO
GUTTER / TERMINATION BAR - RECOVER FOR TPO
GUTTER DRIP EDGE - TPO COATED METAL
METAL RETROFIT - MEMBRANE COATED DRIP EDGE WITH GUTTER FOR TPO
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR TPO
PREMANUFACTURED ARCHED DRIP EDGE WITH SPLICE CLIP FOR TPO
PREMANUFACTURED MEMBRANE COATED METAL PITCH PAN FOR TPO
SNAP-ON FASCIA FOR TPO
TAPERED EDGE / GRAVEL STOP FOR TPO

END LAPS FOR TPO
FIELD SEAM - PLATE POSITION FOR TPO
FIELD SEAM ATTACHMENT
FIELD SEAM FOR TPO
MEMBRANE / SEAM REPAIR WHITE MATE-LINE TAPE
METAL RETROFIT - 10 inch RUSS RIDGE SECUREMENT DETAIL FOR TPO
METAL RETROFIT - 10 inch RUSS STRIP MEMBRANE SECUREMENT FOR TPO
METAL RETROFIT - 100 MPH OR LESS WIDE SHEETS WITH SEAMS OVER PURLINS FOR TPO
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 1
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 2
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 1
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 2
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 3
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 4
METAL RETROFIT - 101-120 MHP WIND ZONES NARROW SHEETS WITH SEAMS OVER PURLINS
METAL RETROFIT - SEAM FASTENING NARROW ROLLS MEMBRANE SECUREMENT FOR TPO
SEAM PATCH AT FIELD/WALL TRANSITION FOR TPO
T-JOINT COVER - 60 MIL OR THICKER MEMBRANES FOR TPO
T-JOINT DETAIL - 45 MIL THICK MEMBRANES FOR TPO
UNCURED EPDM SEAM PATCH AT FIELD / WALL TRANSITION

CURB/WALL FLASHING WITH COUNTERFLASHING FOR TPO
PREMANUFACTURED ARCHED COPING WITH SPLICE PLATE
PREMANUFACTURED METAL EDGE EXTENDER
PREMANUFACTURED REGLET COUNTERFLASHING
PREMANUFACTURED SURFACE MOUNTED COUNTERFLASHING
WALL FLASHING WITH COUNTERFLASHING FOR TPO

SEGREGATION DETAIL/GREEN ROOF AND EXISTING ROOF
SEGREGATION DETAIL/GREEN ROOF AND EXPOSED SINGLE PLY
TIE-IN - EXISTING BUR OR MOD BIT
TIE-IN - SHINGLE ROOF - 6 inch RUSS FOR TPO
TIE-IN - SHINGLE ROOF FOR TPO
TIE-IN TO EXISTING BUR / MOD BIT ROOF - RECOVER SITUATION FOR TPO
TIE-IN TO EXISTING EPDM OR HYPALON - TEAR-OFF SITUATION FOR TPO
TIE-IN TO SOLID DECK WITH CURB - CURB PARALLEL TO SLOPE WITH TEAR-OFF FOR TPO

RIDGE FLASHING FOR TPO
RIDGE SHEET LAYOUT FOR TPO
VALLEY FLASHING - 6 inch RUSS FOR TPO - OPTION 2
VALLEY FLASHING 6 inch RUSS FOR TPO - OPTION 1
VALLEY FLASHING FOR TPO - OPTION 1
VALLEY FLASHING FOR TPO - OPTION 2

Specifications

Specification - TPO Systems Ballasted
Summary Specification - TPO - Ballasted

Specification - TPO Fully Adhered
Specification Supplement - AeroWeb Adhesive
Summary Specification - TPO Systems Fully Adhered

Guide - Equipment needed to install Heat-Welded Membranes
Guide - Insulation Guidelines
Guide - Roof Mounted Photovoltaic Installations
Guide - TPO Systems Installation Guidelines
Single-Ply Insulation Attachment Guidelines
Tech Note - Design Wind Speed vs Warranted Wind Speed
Tech Note - Sheet Flutter on Mechanically Attached Systems

Specification - TPO Systems Induction Welding Attachment
Specification - TPO Systems Mechanically Attached
Specification - TPO Systems RhinoBond Attachment
Summary Specification - TPO Systems Mechanically Attached
Summary Specification - Induction Welding Attachment Method
Summary Specification - TPO Systems Induction Welding Linear Attachment
Summary Specification - TPO Systems metal retrofit using RUSS
Summary Specification - TPO Systems metal retrofit-purlin attached

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
07MHT4041G MH TPO 045 4 X 100 REIN MEMBRANE GRY Shrink Wrap 1 102 400 Sq.Ft/RL
07MHT4041T MH TPO 045 4 X 100 REIN MEMBRANE TAN Shrink Wrap 1 102 400 Sq.Ft/RL
07MHT4041W MH TPO 045 4 X 100 REIN MEMBRANE WHT Shrink Wrap 1 106 400 Sq.Ft/RL
07MHT4061G MH TPO 045 6 X 100 REIN MEMBRANE GRY Shrink Wrap 1 155 600 Sq.Ft/RL
07MHT4061T MH TPO 045 6 X 100 REIN MEMBRANE TAN Shrink Wrap 1 155 600 Sq.Ft/RL
07MHT4061W MH TPO 045 6 X 100 REIN MEMBRANE WHT Shrink Wrap 1 159 600 Sq.Ft/RL
07MHT4081G MH TPO 045 8 X 100 REIN MEMBRANE GRY Shrink Wrap 1 205 800 Sq.Ft/RL
07MHT4081T MH TPO 045 8 X 100 REIN MEMBRANE TAN Shrink Wrap 1 205 800 Sq.Ft/RL
07MHT4081W MH TPO 045 8 X 100 REIN MEMBRANE WHT Shrink Wrap 1 214 800 Sq.Ft/RL
07MHT4101G MH TPO 045 10 X 100 REIN MEMBRANE GRY Shrink Wrap 1 253 1000 Sq.Ft/RL
07MHT4101T MH TPO 045 10 X 100 REIN MEMBRANE TAN Shrink Wrap 1 253 1000 Sq.Ft/RL
07MHT4101W MH TPO 045 10 X 100 REIN MEMBRANE WHT Shrink Wrap 1 264 1000 Sq.Ft/RL
07MHT4121G MH TPO 045 12 X 100 REIN MEMBRANE GRY Shrink Wrap 1 313 1200 Sq.Ft/RL
07MHT4121T MH TPO 045 12 X 100 REIN MEMBRANE TAN Shrink Wrap 1 313 1200 Sq.Ft/RL
07MHT4121W MH TPO 045 12 X 100 REIN MEMBRANE WHT Shrink Wrap 1 319 Shrink Wrap
07MHT6041G MH TPO 060 4 X 100 REIN MEMBRANE GRY Shrink Wrap 1 131 400 Sq.Ft/RL
07MHT6041T MH TPO 060 4 X 100 REIN MEMBRANE TAN Shrink Wrap 1 131 400 Sq.Ft/RL
07MHT6041W MH TPO 060 4 X 100 REIN MEMBRANE WHT Shrink Wrap 1 131 400 Sq.Ft/RL
07MHT6061G MH TPO 060 6 X 100 REIN MEMBRANE GRY Shrink Wrap 1 196 600 Sq.Ft/RL
07MHT6061T MH TPO 060 6 X 100 REIN MEMBRANE TAN Shrink Wrap 1 196 600 Sq.Ft/RL
07MHT6061W MH TPO 060 6 X 100 REIN MEMBRANE WHT Shrink Wrap 1 198 600 Sq.Ft/RL
07MHT6081G MH TPO 060 8 X 100 REIN MEMBRANE GRY Shrink Wrap 1 268 800 Sq.Ft/RL
07MHT6081T MH TPO 060 8 X 100 REIN MEMBRANE TAN Shrink Wrap 1 268 800 Sq.Ft/RL
07MHT6081W MH TPO 060 8 X 100 REIN MEMBRANE WHT Shrink Wrap 1 261 800 Sq.Ft/RL
07MHT6101G MH TPO 060 10 X 100 REIN MEMBRANE GRY Shrink Wrap 1 332 1000 Sq.Ft/RL
07MHT6101T MH TPO 060 10 X 100 REIN MEMBRANE TAN Shrink Wrap 1 332 1000 Sq.Ft/RL
07MHT6101W MH TPO 060 10 X 100 REIN MEMBRANE WHT Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT611FW MH TPO 060 10 X 100 REIN MEMBRANE FR WHT Shrink Wrap 1 351 1000 Sq.Ft/RL
07MHT611MZ MH TPO 060 10X100 RE MEM MED BRONZE Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT611PG MH TPO 060 10X100 RE MEM PATINA GREEN Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT611RB MH TPO 060 10X100 RE MEM ROCK BROWN Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT611SG MH TPO 060 10X100 RE MEM SLATE GRAY Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT611TE MH TPO 060 10X100 RE MEM TERRA COTTA Shrink Wrap 1 330 1000 Sq.Ft/RL
07MHT6121G MH TPO 060 12 X 100 REIN MEMBRANE GRY Shrink Wrap 1 403 1200 Sq.Ft/RL
07MHT6121T MH TPO 060 12 X 100 REIN MEMBRANE TAN Shrink Wrap 1 398 1200 Sq.Ft/RL
07MHT6121W MH TPO 060 12 X 100 REIN MEMBRANE WHT Shrink Wrap 1 403 1200 Sq.Ft/RL
07MHT8041G MH TPO 080 4 X 100 REIN MEMBRANE GRY Shrink Wrap 1 171 400 Sq.Ft/RL
07MHT8041T MH TPO 080 4 X 100 REIN MEMBRANE TAN Shrink Wrap 1 172 400 Sq.Ft/RL
07MHT8041W MH TPO 080 4 X 100 REIN MEMBRANE WHT Shrink Wrap 1 172 400 Sq.Ft/RL
07MHT8061G MH TPO 080 6 X 100 REIN MEMBRANE GRY Shrink Wrap 1 257 600 Sq.Ft/RL
07MHT8061T MH TPO 080 6 X 100 REIN MEMBRANE TAN Shrink Wrap 1 257 600 Sq.Ft/RL
07MHT8061W MH TPO 080 6 X 100 REIN MEMBRANE WHT Shrink Wrap 1 271 600 Sq.Ft/RL
07MHT8081G MH TPO 080 8 X 100 REIN MEMBRANE GRY Shrink Wrap 1 342 800 Sq.Ft/RL
07MHT8081T MH TPO 080 8 X 100 REIN MEMBRANE TAN Shrink Wrap 1 342 800 Sq.Ft/RL
07MHT8081W MH TPO 080 8 X 100 REIN MEMBRANE WHT Shrink Wrap 1 342 800 Sq.Ft/RL
07MHT8101G MH TPO 080 10 X 100 REIN MEMBRANE GRY Shrink Wrap 1 426 1000 Sq.Ft/RL
07MHT8101T MH TPO 080 10 X 100 REIN MEMBRANE TAN Shrink Wrap 1 426 1000 Sq.Ft/RL
07MHT8101W MH TPO 080 10 X 100 REIN MEMBRANE WHT Shrink Wrap 1 442 1000 Sq.Ft/RL
07MHT8121G MH TPO 080 12 X 100 REIN MEMBRANE GRY Shrink Wrap 1 512 1200 Sq.Ft/RL
07MHT8121W MH TPO 080 12 X 100 REIN MEMBRANE WHT Shrink Wrap 1 556 1200 Sq.Ft/RL
07MHT4165W TPO 45 mil 16' × 100' White Shrink Wrap 478 1600 Sq.FT/RL
07MHT4161G TPO 45 mil 16' × 100' Gray Shrink Wrap 0 1600 Sq.FT/RL
07MHT4161T TPO 45 mil 16' x 100' Tan Shrink Wrap 0 1600 Sq.FT/RL
07MHT6161G TPO 60 mil 16' x 100' Gray Shrink Wrap 0 1600 Sq.FT/RL
07MHT6161T TPO 60 mil 16' × 100' Tan Shrink Wrap 0 1600 Sq.FT/RL
07MHT6161W TPO 60 mil 16' x 100' White Shrink Wrap 0 1600 Sq.FT/RL
07MHT8161G TPO 80 mil 16' × 100' Gray Shrink Wrap 0 1600 Sq.FT/RL
07MHT8161T TPO 80 mil 16' y 100' Tan Shrink Wrap 0 1600 Sq.FT/RL
07MHT8161W TPO 80 mil 16' x 100' White Shrink Wrap 0 1600 Sq.FT/RL
07MHT4126W MH TPO 045 12 X 600 REINFORCED MEMBRANE WHITE 0 7200 Sq.FT/RL

FAQs

Fees vary depending on the type of warranty desired. Current Fees are listed on Mule-Hide Warranty Application forms.

Walkway Rolls are always recommended. Mule-Hide offers walk pads for each system/membrane type we sell.

No, this is not required, but all areas of wet insulation must be replaced with new, dry, similar material, specific warranties may require an independent moisture scan of the roof.

Yes, Mule-Hide Territory Managers offer these services.

Just provide Mule-Hide with the following information: A copy of the specification Name & address to whom the letter should be addressed Your phone & fax number What is the UL/FM requirement? Deck type? Slope? Insulation type and thickness? Membrane and system? Building location and height? Overall dimensions? Parapet height?

To reduce blocking, packs should only be stacked 4-packs up to five high. We have found that when stacked higher, the bottom rolls could crush a bit which could create blocking and a wavy sheet when installed. It is possible that the stacking issue can be heightened over the summer months due to the heat.