Documents
Product Data Sheet
9" Reinforced EPDM Membrane Strips (RMS)
PDS EPDM Systems Reinforced Membrane Strips - RMS
10/24/2017
PDS EPDM Systems Reinforced Membrane Strips - RMS
https://mulehide.azureedge.net/productdocuments/43/PDS-EPDM-Systems-Reinforced-Membrane-Strips-RMS.pdf
Safety Data Sheet
9" Reinforced EPDM Membrane Strips (RMS)
SDS EPDM Systems Accessories
9/8/2016
SDS EPDM Systems Accessories
https://mulehide.azureedge.net/productdocuments/21/SDS-EPDM-Systems-Accessories.pdf
Brochure
9" Reinforced EPDM Membrane Strips (RMS)
Single-Ply Roofing Accessories Catalog
8/6/2018
Single-Ply Roofing Accessories Catalog
https://mulehide.azureedge.net/productdocuments/22/Single-PlyRoofingAccessoriesCatalog.pdf
Details - Perimeter Enhancements
9" Reinforced EPDM Membrane Strips (RMS)
PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
10/20/2017
PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
https://mulehide.azureedge.net/productdocuments/63/PERIMETER-ENHANCEMENT-FULL-SHEET-WITH-9-inch-RMS-FOR-EPDM.pdf
https://mulehide.azureedge.net/productdocuments/63/PERIMETER-ENHANCEMENT-FULL-SHEET-WITH-9-inch-RMS-FOR-EPDM.dwg

9" Reinforced EPDM Membrane Strips (RMS)

Flashing > Tapes/Strips

Available in a 9" width with two strips of pre-applied In-Seam Tape. Used to attach EPDM membranes horizontally in the field of the roof on mechanically fastened systems. This product requires the use of Tape Primer or Low VOC Tape Primer.

 
EPDM

Find a Distributor


 
Features & Benefits
  • Used for perimeter enhancement in lieu of half sheets
  • Must be installed with tape primer, #14 or 15# fastener and 2.4" seam plates
  • Cannot be used where there is a 2" per foot or greater angle change
 

Options
Item ID Description Packaging Qty per Ctn Weight per Ctn Coverage Rate
08MHRMS91T MH EPDM 9"X100 REINF STRIP W/TAPE Roll 1 36 lbs

Mule-Hide Delivers

Extensive Warranty Program

Extensive Code Approvals

Downloadable Specifications

Special Solution Support

The Mule-Hide Promise