Skip to content
Weathered Membrane Cleaner

Weathered Membrane Cleaner

Used to clean in-service EPDM membrane that has been exposed to the weather and clean TPO membrane prior to the welding process. Helps to loosen and remove dirt and other contaminants from the surface of the EPDM and TPO membranes and leaves a suitable surface for welding or the subsequent application of Tape Primer.

System

EPDM
TPO
M&R
  • Essential for every EPDM/TPO project
  • Solvent based all purpose cleaner
  • Dries film free
  • Unlimited shelf-life
  • Meets ICC-ES Standards

Documents

PDS Weathered Membrane Cleaner
View English
View Spanish
SDS Weathered Membrane Cleaner
View English
View Spanish

Maintenance & Repair Brochure
View English
View Spanish
OTC Regulation Update for Adhesives and Sealants
View English
View Spanish

Details

6 inch RMS WITH TAPE
View English DWG
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/6 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/ADHESIVE
View English DWG
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/COVER TAPE
View English DWG
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/ADHESIVE
View English DWG
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/COVER TAPE
View English DWG
PARAPET/CURB FLASHING BAR HORIZONTAL ATTACHMENT W/3 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
View English DWG
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
View English DWG
PARAPET/CURB FLASHING RMS W/TAPE - VERTICAL
View English DWG
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - ADHESIVE
View English DWG
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/3 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/6 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/COVER TAPE
View English DWG
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/ADHESIVE
View English DWG
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/COVER TAPE
View English DWG

2-PIECE INSIDE CORNER WALL FLASHING FOR EPDM
View English DWG
EPDM OUTSIDE CORNER - ONE PIECE WRAP
View English DWG
EPDM OUTSIDE CORNER - TWO PIECE
View English DWG
INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING - 90 MIL EPDM
View English
INSIDE CORNER WITH SEPARATE EPDM WALL FLASHING - 90 MIL EPDM
View English
OUTSIDE CORNER WITH UNCURED FLASHING TAPE - 90 MIL EPDM
View English

CURB FLASHING - 90 MIL EPDM
View English
MULTIPLE PENETRATIONS CURB DETAIL - 90 MIL EPDM
View English
PARAPET/CURB FLASHING FOR EPDM
View English DWG
PARAPET/CURB WITH SEPARATE EPDM MEMBRANE - 90 MIL EPDM
View English
SLEEPER FOR EPDM
View English DWG
WELDED CURB FLASHING
View English DWG
WELDED CURB FLASHING - ALL PURPOSE BAR TERMINATION FOR EPDM
View English DWG
WELDED CURB FLASHING - AP BAR TERMINATION
View English DWG
WELDED CURB FLASHING - HIGH CURB FOR EPDM
View English DWG
WELDED CURB FLASHING FOR EPDM
View English DWG
WELDED CURB OVER FIELD MEMBRANE WITH CURED OR UNCURED FLASHING TAPE
View English DWG
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE
View English DWG
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE FOR EPDM
View English DWG
WOOD CURB OVER FIELD MEMBARNE WITH SEAM TAPE
View English DWG
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE
View English DWG
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE FOR EPDM
View English DWG

DRAIN INSERT FOR EPDM
View English DWG
DUTCH GUTTER FOR EPDM AND TPO
View English DWG
INTERMITTENT WALL SCUPPER FOR EPDM
View English DWG
ROOF DRAIN FOR EPDM AND TPO
View English DWG
ROOF DRAIN WITH SUMP FOR EPDM
View English DWG

12 inch SELF-BRIDGING MATE-LINE
View English DWG
9 inch SELF-BRIDGING MATE-LINE
View English DWG
DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
View English DWG
EXPANSION JOINT - DECK TO WALL JOINT
View English DWG
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
View English DWG
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
View English DWG
EXPANSION JOINT - EXISTING FIELD JOINT - A FOR EPDM
View English DWG
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
View English DWG
EXPANSION JOINT - EXISTING FIELD JOINT "A"
View English DWG
EXPANSION JOINT - EXISTING FIELD JOINT "B"
View English DWG
EXPANSION JOINT - FIELD JOINT
View English DWG
EXPANSION JOINT - FIELD JOINT - RMS
View English DWG
EXPANSION JOINT - FIELD JOINT FOR EPDM
View English DWG
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
View English DWG
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE
View English DWG
MATE-LINE WITH COVER TAPE
View English DWG
MATE-LINE WITH COVER TAPE - WOOD BRIDGING MATERIAL
View English DWG
RAISED MATE-LINE
View English DWG
RAISED MATE-LINE
View English DWG

PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
View English DWG

FIELD FABRICATED HOT PIPE - ADHESIVE FOR EPDM
View English DWG
FIELD FABRICATED HOT STACK - 90 MIL EPDM
View English
FIELD FABRICATED PIPE FLASHING - ADHESIVE
View English DWG
FIELD FABRICATED PIPE SEAL - 90 MIL EPDM
View English
FIELD FABRICATED PITCH PAN - ADHESIVE
View English DWG
FLEXIBLE PENETRATION - 90 MIL EPDM
View English
LIGHTNING ROD - HORIZONTAL ATTACHMENT FOR EPDM
View English DWG
LIGHTNING ROD - VERTICAL ATTACHMENT FOR EPDM
View English DWG
MOLDED PIPE FLASHING WITH TAPE - 90 MIL EPDM
View English
POURABLE SEALER POCKET DOUBLE APPLICATION - 90 MIL EPDM
View English
POURABLE SEALER POCKET FOR EPDM
View English DWG
POURABLE SEALER POCKET WITH RAIN HOOD - 90 MIL EPDM
View English
PRE-FABRICATED METAL PITCH PAN FOR EPDM
View English DWG
PREMOLDED EPDM PIPE BOOT WITH TAPE
View English DWG
PREMOLDED EPDM PIPE BOOT WITH TAPE - MECHANICALLY ATTACHED
View English DWG

ALL PURPOSE BAR TERMINATION - 90 MIL EPDM
View English
Batten Bar with Cover Strip
View English DWG
DRIP APRON / GUTTER TERMINATION EPDM
View English DWG
DRIP APRON TERMINATION FOR EPDM
View English DWG
DRIP EDGE - 90 MIL EPDM
View English
DRIP EDGE AT MANSARD FOR EPDM
View English DWG
GRAVEL STOP TERMINATION FOR EPDM
View English DWG
GRAVEL STOP WITH SCUPPER FOR EPDM
View English DWG
GRAVEL STOP WITH SNAP LOCK FASCIA FOR EPDM
View English DWG
METAL ERA ANCHOR-TITE EDGE DETAIL - 90 MIL EPDM
View English
METAL RETROFIT - MEMBRANE COATED DRIP EDGE WITH GUTTER FOR TPO
View English DWG
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR EPDM - OPTION 2
View English DWG
PREMANUFACTURED ARCHED DRIP EDGE W/SPLICE CLEAT FOR EPDM
View English DWG

END LAP AND T-JOINT DETAIL FOR EPDM
View English DWG
MEMBRANE SPLICE ALL-PURPOSE BAR WITH ADHESIVE - 7 inch SEAM
View English DWG
MEMBRANE SPLICE W/2.4 inch SEAM PLATE - 8 inch SEAM - ADHESIVE
View English DWG
MEMBRANE SPLICE W/3 inch IN-SEAM TAPE
View English DWG
MEMBRANE SPLICE W/6 inch IN-SEAM TAPE
View English DWG
MEMBRANE SPLICE W/6 inch TAPE AND 2.4 inch SEAM PLATE - 6 inch WIDE SEAM
View English DWG
MEMBRANE SPLICE W/6 inch TAPE A-P 40 ANCHOR BAR - 6 inch WIDE SEAM
View English DWG
MEMBRANE SPLICE W/SPLICE ADHESIVE - 6 inch SEAM
View English DWG
MEMBRANE SPLICE WITH IN-SEAM TAPE - 3 inch SEAM
View English DWG
MEMBRANE SPLICE WITH IN-SEAM TAPE - 90 MIL
View English
MEMBRANE SPLICE WITH SPLICE ADHESIVE - 3 inch SEAM
View English DWG
MEMBRANE SPLICE, AP BAR OR 2.4" SEAM PLATE WITH 6" IN-SEAM TAPE
View English
METAL RETROFIT - 10 inch RUSS RIDGE SECUREMENT DETAIL FOR TPO
View English DWG
METAL RETROFIT - 10 inch RUSS STRIP MEMBRANE SECUREMENT FOR TPO
View English DWG
METAL RETROFIT - 100 MPH OR LESS WIDE SHEETS WITH SEAMS OVER PURLINS FOR TPO
View English DWG
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 1
View English DWG
METAL RETROFIT - 100 MPH OR LESS WIND ZONES MECHANICALLY ATTACHED SYSTEM FOR TPO - OPTION 2
View English DWG
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 1
View English DWG
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 2
View English DWG
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 3
View English DWG
METAL RETROFIT - 101-120 MHP WIND ZONES MECHANICALLY ATTACHED FOR TPO - OPTION 4
View English DWG
METAL RETROFIT - 101-120 MHP WIND ZONES NARROW SHEETS WITH SEAMS OVER PURLINS
View English DWG
METAL RETROFIT - SEAM FASTENING NARROW ROLLS MEMBRANE SECUREMENT FOR TPO
View English DWG
VERTICAL TERMINATION - 90 MIL EPDM
View English
WALL FLASHING WITH CONTINUOUS MEMBRANE - 90 MIL EPDM
View English

MODULAR EPDM Mate-Line- Cover Tape
View English DWG
VERTICAL TERMINATION COUNTERFLASHING FOR EPDM
View English DWG
VERTICAL TERMINATION COUNTERFLASHING W/A-P BAR FOR EPDM
View English DWG
VERTICAL TERMINATION METAL COPING FOR EPDM
View English DWG
VERTICAL TERMINATION REGLET FOR EPDM
View English DWG
VERTICAL TERMINATION STONE COPING FOR EPDM
View English DWG
VERTICAL TERMINATION WITH A-P BAR FOR EPDM
View English DWG

EPDM BASE TIE-IN TO SHINGLE ROOF ALL PURPOSE BAR ATTACHMENT FOR EPDM
View English DWG
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM
View English DWG
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM - OPTION 2
View English DWG
EPDM TIE-IN TO BUILT-UP ROOF - ADHESIVE
View English DWG
EPDM TIE-IN TO BUILT-UP ROOF - IN-SEAM TAPE
View English DWG

RIDGE ATTACHMENT WITH RMS FOR EPDM
View English DWG

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHTWMC1 MH 1 GAL WEATHERED MEMBRANE CLEANER 2/CT Metal Can 2 15 400 sq.ft. (1-side) per gallon
08MHTWMC5 MH 5 GAL WEATHERED MEMBRANE CLEANER Metal Pail 1 35 400 sq.ft. (1-side) per gallon

Videos

FAQs

This product does not comply with the following Utah counties’ VOC regulations: Box Elder, Cache, Davis, Salt Lake, Tooele, Utah, and Weber. Low VOC Weathered Membrane Cleaner is available for use in these areas.

Weathered Membrane Cleaner can only be used with EPDM and TPO membranes. For PVC, we recommend the use of PVC Membrane Cleaner.

This product does not comply with the following California counties’ VOC regulations: Alameda, Contra Costa, El Dorado, Los Angeles, Marin, Napa, Orange, Riverside, Sacramento, San Bernardino, San Diego, San Francisco, San Mateo, Santa Clara, Solano, Sonoma and Tehama. Low VOC Weathered Membrane Cleaner is available for use in these areas.