Skip to content
Aqua Base 120

Aqua Base 120

A two-sided water based bonding adhesive used to adhere EPDM, Standard TPO, TPO Fleece Back and PVC Fleece Back membranes to approved surfaces. Can be used as a one-sided, wet lay-in adhesive with MuleHide Fleece Back membranes. Low-temperature restrictions apply.

System

EPDM
TPO
  • No/Low-VOC
  • One-sided wet lay-in with Fleece Back
  • Horizontal and vertical surfaces
  • Easy cleanup
  • Approved for EPDM, Standard TPO, TPO Fleece Back and PVC Fleece Back membranes
  • Outdoor temperature must be 40°F and rising for 48 hours
  • Do not freeze, do not thin
  • Meets UL Standards
  • Meets C-UL Standards
  • Meets FM Standards
  • Meets Miami-Dade-County Standards
  • Meets Florida-Building Standards
  • Meets ICC-ES Standards

Documents

PDS Aqua Base 120 bonding adhesive
View English
View Spanish
SDS Aqua Base 120 Bonding Adhesive
View English
View Spanish

Single-Ply Roofing Accessories Guide
View English
View Spanish
Tech Bulletin - Cold Weather Installation
View English
View Spanish

Details

BASE ATTACHMENT PVC - ALL-PURPOSE BAR
View English DWG
BASE ATTACHMENT TPO- ALL -PURPOSE BAR
View English DWG
BASE ATTACHMENT USING 6 inch STANDARD TPO-C MEMBRANE
View English DWG
BASE ATTACHMENT USING 9 inch INVERTED FLEECE BACK
View English DWG
BASE ATTACHMENT WITH 6 inch RUSS
View English DWG
BASE ATTACHMENT WITH PLATES AND FASTENERS
View English DWG
PARAPET FLASHING FOR PVC
View English DWG
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/6 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/ADHESIVE
View English DWG
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/COVER TAPE
View English DWG
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/ADHESIVE
View English DWG
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/COVER TAPE
View English DWG
PARAPET/CURB FLASHING BAR HORIZONTAL ATTACHMENT W/3 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING RMS W/TAPE - VERTICAL
View English DWG
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - ADHESIVE
View English DWG
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/3 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/6 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/COVER TAPE
View English DWG
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
View English DWG
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/ADHESIVE
View English DWG
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/COVER TAPE
View English DWG

FIELD FABRICATED INSIDE CORNER FOR TPO
View English DWG
FIELD FABRICATED OUTSIDE CORNER FOR PVC
View English DWG
FIELD FABRICATED OUTSIDE CORNER FOR TPO
View English DWG
INSIDE CORNER - UNCURED EPDM
View English DWG
INSIDE CORNER FOR TPO
View English DWG
INSIDE CORNER USING RUSS FOR TPO
View English DWG
PRE-MOLDED OUTSIDE CORNER FOR PVC
View English DWG

CURB FLASHING FOR PVC
View English DWG
CURB FLASHING WITH M-H ALL-PURPOSE BAR
View English DWG
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR FOR TPO
View English DWG
DRAIN FLASHING WITH TARGET - FLEECE BACK
View English DWG
PARAPET WALL DETAIL - METAL COPING CAP FOR TPO
View English DWG
PARAPET/CURB FLASHING FOR EPDM
View English DWG
SLEEPER FOR EPDM
View English DWG
WELDED CURB FLASHING - ALL PURPOSE BAR TERMINATION FOR EPDM
View English DWG
WELDED CURB FLASHING - AP BAR TERMINATION
View English DWG
WELDED CURB FLASHING - HIGH CURB FOR EPDM
View English DWG

DRAIN FLASHING WITH TARGET FOR TPO
View English DWG
DRAIN INSERT FOR EPDM
View English DWG
MECHANICALLY FASTENED TARGET ROOF DRAIN FOR PVC
View English DWG
ROOF DRAIN - SUMPS SLOPED MORE THAN 3" PER FOOT - 1 OF 2
View English DWG
ROOF DRAIN FOR DRAIN SUMPS SLOPED LESS THAN 3 inch PER FOOT FOR PVC
View English DWG
ROOF DRAIN FOR EPDM
View English DWG
ROOF DRAIN WITH SUMP FOR EPDM
View English DWG
THROUGH-WALL SCUPPER - TPO COATED METAL
View English DWG
THROUGH-WALL SCUPPER - TPO COATED METAL
View English DWG

DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
View English DWG
EXPANSION JOINT - CURB FOR TPO
View English DWG
EXPANSION JOINT - DECK TO DECK
View English DWG
EXPANSION JOINT - DECK TO DECK FOR PVC
View English DWG
EXPANSION JOINT - DECK TO WALL JOINT
View English DWG
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
View English DWG
EXPANSION JOINT - DECK TO WALL JOINT - C - ADHESIVE FOR EPDM
View English DWG
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
View English DWG
EXPANSION JOINT - EXISTING FIELD JOINT - A FOR EPDM
View English DWG
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
View English DWG
EXPANSION JOINT - EXISTING FIELD JOINT "A"
View English DWG
EXPANSION JOINT - EXISTING FIELD JOINT "B"
View English DWG
EXPANSION JOINT - FIELD JOINT
View English DWG
EXPANSION JOINT - FIELD JOINT FOR EPDM
View English DWG
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
View English DWG
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE
View English DWG
EXPANSION JOINT DETAIL
View English DWG
EXPANSION JOINT DETAILS
View English DWG
WALL EXPANSION JOINT
View English DWG
WALL EXPANSION JOINT
View English DWG

CONCRETE PAVER WALKWAY
View English DWG
MH-100 PVC Walkway
View English DWG

ROOF PERIMETER/CORNER CALCULATION ELEVATION DIFFERENCE GREATER THAN 3ft FOR TPO
View English DWG
ROOF PERIMETER/CORNER CALCULATIONS ELEVATION DIFFERENCE 3ft OR LESS FOR PVC
View English DWG
ROOF PERIMETER/CORNER CALCULATIONS ELEVATION DIFFERENCE GREATER THAN 3ft FOR PVC
View English DWG

FIELD FABRICATED HOT PIPE - ADHESIVE FOR EPDM
View English DWG
FIELD FABRICATED PIPE FLASHING - ADHESIVE
View English DWG
FIELD FABRICATED PIPE FLASHING FOR PVC
View English DWG
FIELD FABRICATED PITCH PAN - ADHESIVE
View English DWG
FIXED EQUIPMENT SUPPORT FOR TPO
View English DWG
HOT PIPE FLASHING WITH COLD SLEEVE FOR TPO
View English DWG
LIGHTNING ROD - HORIZONTAL ATTACHMENT FOR EPDM
View English DWG
LIGHTNING ROD - VERTICAL ATTACHMENT FOR EPDM
View English DWG
LIGHTNING ROD BASE FOR TPO
View English DWG
LIGHTNING ROD WALL SUPPORT FOR TPO
View English DWG
MOLDED SEALANT POCKET FOR PVC
View English DWG
POURABLE SEALER POCKET FOR EPDM
View English DWG
PREFABRICATED SQUARE TUBING WRAP FOR TPO
View English DWG
PREMOLDED EPDM PIPE BOOT WITH TAPE
View English DWG
WOOD SLEEPER FOR TPO
View English DWG

ALL PURPOSE BAR TERMINATION for EPDM
View English DWG
ALL-PURPOSE BAR - EDGE TERMINATION FOR TPO
View English DWG
COATED METAL BUTT JOINT FOR PVC
View English DWG
DRIP APRON / GUTTER TERMINATION EPDM
View English DWG
DRIP EDGE AT MANSARD FOR EPDM
View English DWG
DRIP EDGE FOR ALL PVC SYSTEMS
View English DWG
DRIP EDGE TPO COATED METAL
View English DWG
EDGE TERMINATION - ALL-PURPOSE BAR FOR TPO
View English DWG
GRAVEL STOP - TPO COATED METAL - OPTION 2
View English DWG
GRAVEL STOP JOINT DETAIL - TPO COATED METAL
View English DWG
GRAVEL STOP TERMINATION FOR EPDM
View English DWG
GRAVEL STOP WITH SCUPPER FOR EPDM
View English DWG
GRAVEL STOP WITH SNAP LOCK FASCIA FOR EPDM
View English DWG
GUTTER / TERMINATION BAR - RECOVER FOR TPO
View English DWG
GUTTER / TERMINATION BAR - RECOVER FOR TPO
View English DWG
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR EPDM - OPTION 2
View English DWG
PREMANUFACTURED MEMBRANE COATED METAL PITCH PAN FOR TPO
View English DWG
PVC COATED GRAVEL STOP
View English DWG
TAPERED EDGE / GRAVEL STOP FOR TPO
View English DWG

METAL RETROFIT - 100 MPH OR LESS WIDE SHEETS WITH SEAMS OVER PURLINS FOR TPO
View English DWG

CONCRETE PARAPET WALL WITH TERMINATION BAR FOR PVC
View English DWG
COPING STONE FOR PVC
View English DWG
CURB/WALL FLASHING WITH COUNTERFLASHING FOR TPO
View English DWG
METAL CAP TERMINATION FOR PVC
View English DWG
REGLET COUNTERFLASHING TERMINATION FOR PVC
View English DWG
SURFACE MOUNTED COUNTERFLASHING FOR PVC
View English DWG
TERMINATION BAR AT TILT-UP WALL JOINT FOR PVC
View English DWG
TERMINATION BAR FOR PVC
View English DWG
TERMINATION BAR WITH COUNTERFLASHING FOR PVC
View English DWG
TERMINATION ELEVATION CHANGE FOR PVC
View English DWG
VERTICAL TERMINATION COUNTERFLASHING FOR EPDM
View English DWG
VERTICAL TERMINATION COUNTERFLASHING W/A-P BAR FOR EPDM
View English DWG
VERTICAL TERMINATION METAL COPING FOR EPDM
View English DWG
VERTICAL TERMINATION REGLET FOR EPDM
View English DWG
VERTICAL TERMINATION STONE COPING FOR EPDM
View English DWG
VERTICAL TERMINATION WITH A-P BAR FOR EPDM
View English DWG
WALL FLASHING WITH COUNTERFLASHING FOR TPO
View English DWG

COATED METAL TRANSITION TO SHINGLE ROOF FOR PVC
View English DWG
EPDM BASE TIE-IN TO SHINGLE ROOF ALL PURPOSE BAR ATTACHMENT FOR EPDM
View English DWG
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM
View English DWG
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM - OPTION 2
View English DWG
EPDM TIE-IN TO BUILT-UP ROOF - ADHESIVE
View English DWG
EPDM TIE-IN TO BUILT-UP ROOF - IN-SEAM TAPE
View English DWG
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
View English DWG
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE
View English DWG
MEMBRANE FLASHING TRANSITION TO SHINGLE ROOF FOR PVC
View English DWG
TIE-IN - EXISTING BUR OR MOD BIT
View English DWG
TIE-IN TO EXISTING EPDM OR HYPALON - TEAR-OFF SITUATION FOR TPO
View English DWG
TIE-IN TO EXISTING SINGLE PLY FOR PVC
View English DWG

VALLEY FLASHING FOR TPO - OPTION 2
View English DWG

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHAB1205 MH AQUA BASE 120 BONDING ADHESIVE 5 GAL Pail 1 47 100-120- sq.ft. per gallon

Videos