Home Roofing Products Asphalt Cements & Coatings > Adhesives 421 Mod Bit Flashing Adhesive - Trowel Grade

421 Mod Bit Flashing Adhesive - Trowel Grade

421 Mod Bit Flashing Adhesive - Trowel Grade

421 Mod Bit Flashing Adhesive - Trowel Grade

Mule-Hide #421 Mod Bit Flashing Adhesive – Trowel Grade is a high quality formulation for use as a cold-applied bonding agent for SBS modified bitumen roof systems. Heavy, “trowel-grade” consistency makes this product ideal for flashing details, attachment of membrane to steep slopes and parapet walls and a variety of waterproofing repairs, especially at moving joints where its flexibility and elasticity make it superior to standard plastic cements. In addition, the formulation is non-destructive to asphalt based roofing membranes.

  • ModBit
  • M&R
FIND A DISTRIBUTOR
Features Documents Details Options Videos FAQs

  • May be used as a topical application on smooth or granule APP products for roofing repairs only
  • For repairing splits, breaks and small holes in asphalt based roof membranes and flashings
  • For applying SBS modified bitumen membrane flashing to parapet walls, curbs and roof penetrations
  • For sealing laps seams and perimeter edges of SBS modified bitumen membranes
  • For installing metal edge flanges and other metal joints
  • Positive-side damp proofing of concrete, masonry walls and foundations
  • DO NOT USE with PVC, TPO, EPDM or other single-ply membranes
  • DO NOT USE over or under expanded polystyrene insulation
  • Meets Miami-Dade-County Standards

Documents

Details

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
16MH4213 MH 421 MOD BIT ADHESIVE-TROWEL 3 GAL Metal Pail 1 27 8 gallons per 100 sq. ft. for 1/8"
16MH4215 MH 421 MOD BIT ADHESIVE-TROWEL 5 GAL Metal Pail 1 46 8 gallons per 100 sq. ft. for 1/8"

FAQs

The coverage rate for Mule-Hide #421 Mod Bit Adhesive – Trowel Grade is approximately 1 to 1.5 gallons per 100 sq. ft. when applied to a smooth surface. (All values are approximate and may vary with ambient temperature and job conditions.)
Mule-Hide #421 Mod Bit Adhesive – Trowel Grade can be applied using a trowel.
NO. DO NOT use Mule-Hide #421 Mod Bit Adhesive – Trowel Grade with PVC, TPO, EPDM or other single-ply roofing membranes.
Yes. DO NOT use Mule-Hide #421 Mod Bit Adhesive – Trowel Grade in the following applications: • Over or under expanded polystyrene insulation. • With organic saturated felts
With proper storage, the shelf life of Mule-Hide #421 Mod Bit Adhesive – Trowel Grade is 18 months from the date of manufacture.
Mule-Hide #421 Mod Bit Adhesive – Trowel Grade should be stored at a temperature of at least 45°F but not above 120°F. It should be stored at room temperature for at least 24 hours prior to use.
Mule-Hide #421 Mod Bit Adhesive – Trowel Grade should only be applied when the ambient temperature is at least 45°F and rising. Cold weather can result in uneven application and improper curing, and it will cause the product to stiffen, making application more difficult. Application is not recommended if the substrate temperature is above 140°F.