ShapeShift pitch pans consist of straight and outside corner sections snap together to create an endless number of pitch pan sizes to seal around roof projections. The
radius corner pieces measure approximately 2" x 2". The straight sections measure approximately 3" long. The high-strength polymer pieces have a 2-1/2" base flange
with a 1-3/4" high side. The pieces snap together with interlocking joints. The smallest pitch pan possible is 4" x 4" (4 corner pieces). The maximum size is unlimited.
ShapeShift pitch pans are approved for installation on Mule-Hide warranted projects when installed on vertical surfaces if filled with JTS 1 sealant instead of MP Liquid Sealant.
Find a Distributor
Features & Benefits
- Can be used vertically with JTS1 as a filler or horizontally with MP Liquid Sealant as a filler
- Flexibility to create any pitch pan size
- No-weld repair for TPO projects
- One solution for EPDM, TPO, PVC, Metal, SPF, EAC, Mod Bit and BUR roofs
- Is approved in Mule-Hide warranted systems
ShapeShift Pitch Pan
Are the pitch pan pieces available in other colors?
No. Pitch pan pieces are manufactured from a white high-strength polymer.
Is this product approved on Mule-Hide warranted systems?
Yes, Mule-Hide warrants the use of ShapeShift pitch pans in all system warranties when properly installed.
Is it necessary to prime the surface before installation?
ShapeShift pitch pans only require priming on certain surfaces to ensure proper adhesion of the pan itself. Si TPO Primer is required on TPO membranes and 2-Part Epoxy Primer is required on Mod Bit and BUR surfaces. There is no need to use primer with ShapeShift pans when installed over EPDM, PVC or metal surfaces.
Do I have to prime inside surfaces before filling?
No primer is required on the inside surfaces of the pan prior to installing the ShapeShift Sealer.
Is there an outside corner piece to make an “L” shaped pan?
No, not at this time. Although it can be made in any size, the pans must be either a square or a rectangle.
Does the MP Liquid Sealant only come in white?
No, it is available in Black or Gray in 2-liter foil pouches (4 pouches/per pail).
Can ShapeShift really install on a wall?
Absolutely, and it is approved for use on MHP system warranties. When filled with JTS 1 sealant, ShapeShift pans provide an excellent way to flash those troublesome cables or conduits that penetrate parapet walls when a prefabricated pipe boot or split pipe boot will not work.
Are extra pieces available?
Cartons are available in straights and corners. A carton of straights contains 16 pieces. A carton of corners contains 48 or 16 pieces.
Will unused product save until the next job?
The threaded cap on the foil pouches allows any unused product to be saved for up to 30 days after opening.