Batten Bar

Batten Bar

Batten Bar

Batten Bars are used to mechanically attach roof membranes and flashings. The bar can be easily cut to any desired length. When installing, start at one end of the batten bar and fasten towards the other to reduce bowing between fasteners. Make sure all corners of cut bar are rounded. Batten Bars meet the corrosion resistance requirements of ASTM D 6294, FM Standard 4470 and DIN 50018. Mule-Hide Flat Batten Bar is flat and used to attach roof membranes and flashings. Use with Mule-Hide #14 HDP, #15 EHD or Purlin. Mule-Hide Recessed Batten Bar has recessed holes and is used to attach roof membranes to the substrate. Recessed Batten Bar should only be used over compressible insulations. When properly fastened, the recessed holes allow the fastener head to remain flush with top surface of bar which helps minimize wrinkles and blisters in adhesive seams. Use with Mule-Hide #14 HDP, #15 EHD or Purlin.

FIND A DISTRIBUTOR

Features & Benefits

  • Rounded ends
  • Horizontal Pre-punched mounting holes 6" or 12" on center
  • With or without recessed punch holes
  • 18 ga. Steel bar with Galvalume AZ-55 coating
  • Must use HDP, EHD or Purlin fasteners for attachment
  • Cannot be used on Mule-Hide system warranties

Documents

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MHBB18 MH FLAT BATTEN BAR 500'/TUBE Fiber Tube 50 85
08MHBB18R MH BATTEN BAR w/RECESSED HOLES 50/TUBE Fiber Tube 50 85