Skip to content
Low-VOC 1168 Bonding Adhesive

Low-VOC 1168 Bonding Adhesive

This version meets requirements of California Rule 1168. A high strength solvent-based contact adhesive that allows bonding of EPDM and TPO to various porous and non-porous substrates. Specially formulated using a blend of VOC exempt and non-exempt solvents to be meet the < 250 g/L VOC content requirements of the OTC Model Rule for adhesives and sealants.

System

EPDM
TPO
  • Horizontal and vertical surfaces
  • Approved to be applied direct to PoyISO
  • No slope restrictions
  • California and Utah compliant
  • Approved for EPDM and TPO
  • Coverage rates will decrease when used on porous substrates
  • Meets  UL Standards
  • Meets  C-UL Standards
  • Meets  FM Standards
  • Meets  Miami-Dade-County Standards
  • Meets  Florida-Building Standards
  • Meets  ICC-ES Standards

Documents

PDS Low VOC Bonding Adhesive 1168 California
SDS Low VOC Bonding Adhesive 1168 California

EPDM Systems Contractor Brochure
Single-Ply Roofing Accessories Guide
Tech Bulletin - Cold Weather Installation

Details

BASE ATTACHMENT - FLEECE BACK
BASE ATTACHMENT - TPO FLEECE BACK RECOVER SYSTEMS ONLY
BASE ATTACHMENT USING 9 inch INVERTED FLEECE BACK
DOOR THRESHOLD FLASHING
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR HORIZONTAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/ADHESIVE
PARAPET/CURB FLASHING A-P BAR VERTICAL ATTACHMENT W/COVER TAPE
PARAPET/CURB FLASHING BAR HORIZONTAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - HORIZONTAL
PARAPET/CURB FLASHING RMS W/TAPE - VERTICAL
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - ADHESIVE
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/3 inch IN-SEAM TAPE
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/6 inch IN-SEAM TAPE
PARAPET/CURB FLASHING W/2.4 inch SEAM PLATES - HORIZONTAL - W/COVER TAPE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/3 inch IN-SEAM TAPE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/6 inch IN-SEAM TAPE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/ADHESIVE
PARAPET/CURB W/2.4 inch SEAM PLATES / VERTICAL ATTACHMENT W/COVER TAPE

FIELD FABRICATED INSIDE CORNER FOR TPO
FIELD FABRICATED OUTSIDE CORNER FOR TPO
INSIDE CORNER - UNCURED EPDM
INSIDE CORNER FOR TPO
INSIDE CORNER USING RUSS FOR TPO
INSIDE CORNER WITH CONTINUOUS EPDM WALL FLASHING - 90 MIL EPDM
INSIDE CORNER WITH SEPARATE EPDM WALL FLASHING - 90 MIL EPDM
OUTSIDE CORNER WITH UNCURED FLASHING TAPE - 90 MIL EPDM
TPO UNIVERSAL CORNER - OUTSIDE CORNER

CURB FLASHING - 90 MIL EPDM
CURB FLASHING FOR TPO
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR - FLEECE BACK & SELF-ADHERING TPO
CURB/WALL FLASHING WITH M-H ALL-PURPOSE BAR FOR TPO
INSULATED PARAPET WALL WITH METAL COPING CAP FOR TPO
MULTIPLE PENETRATIONS CURB DETAIL - 90 MIL EPDM
PARAPET WALL DETAIL - EXISTING COPING CAP FOR TPO
PARAPET WALL DETAIL - METAL COPING CAP FOR TPO
PARAPET/CURB FLASHING FOR EPDM
PARAPET/CURB WITH SEPARATE EPDM MEMBRANE - 90 MIL EPDM
WELDED CURB OVER FIELD MEMBRANE WITH CURED OR UNCURED FLASHING TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE
WELDED CURB OVER FIELD MEMBRANE WITH SEAM TAPE FOR EPDM
WOOD CURB OVER FIELD MEMBARNE WITH SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE
WOOD CURB WITH ALL PURPOSE BAR AND SEAM TAPE FOR EPDM

DRAIN INSERT FOR EPDM
NEW METAL THROUGH-WALL SCUPPER WITH WHITE UNCURED EPDM FOR TPO
ROOF DRAIN FOR EPDM
ROOF DRAIN WITH SUMP FOR EPDM
ROOF DRAIN WITH TAPERED INSULATION FOR EPDM
THROUGH-WALL SCUPPER - TPO COATED METAL
THROUGH-WALL SCUPPER - TPO COATED METAL

DECK TO WALL JOINT - A - RMS STRIP - ADHESIVE
EXPANSION JOINT - CURB FOR TPO
EXPANSION JOINT - DECK TO WALL JOINT
EXPANSION JOINT - DECK TO WALL JOINT - A FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - ADHESIVE FOR EPDM
EXPANSION JOINT - DECK TO WALL JOINT - C - IN-SEAM TAPE FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - A FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT - B FOR EPDM
EXPANSION JOINT - EXISTING FIELD JOINT "A"
EXPANSION JOINT - EXISTING FIELD JOINT "B"
EXPANSION JOINT - FIELD JOINT
EXPANSION JOINT - FIELD JOINT FOR EPDM
EXPANSION JOINT CURB WITH CLOSED CELL ROD
EXPANSION JOINT CURB/FIREWALL - ADHESIVE
EXPANSION JOINT CURB/FIREWALL - IN-SEAM TAPE
RAISED MATE-LINE
RAISED MATE-LINE
WALL EXPANSION JOINT
WALL EXPANSION JOINT

PERIMETER ENHANCEMENT FULL SHEET WITH 9 inch RMS FOR EPDM
PERIMETER SHEET ATTACHMENT FOR EPDM

FIELD FABRICATED HOT PIPE - ADHESIVE FOR EPDM
FIELD FABRICATED HOT STACK - 90 MIL EPDM
FIELD FABRICATED PIPE FLASHING - ADHESIVE
FIELD FABRICATED PIPE SEAL - 90 MIL EPDM
FIELD FABRICATED PITCH PAN - ADHESIVE
FIXED EQUIPMENT SUPPORT FOR TPO
FLEXIBLE PENETRATION - 90 MIL EPDM
I-BEAM SUPPORT FLASHING FOR TPO
LIGHTNING ROD - HORIZONTAL ATTACHMENT FOR EPDM
LIGHTNING ROD - VERTICAL ATTACHMENT FOR EPDM
LIGHTNING ROD WALL SUPPORT FOR TPO
MOLDED PIPE FLASHING WITH TAPE - 90 MIL EPDM
MULTIPLE PIPE PENETRATION FOR TPO
POURABLE SEALER POCKET DOUBLE APPLICATION - 90 MIL EPDM
POURABLE SEALER POCKET FOR EPDM
POURABLE SEALER POCKET WITH RAIN HOOD - 90 MIL EPDM
PRE-FABRICATED METAL PITCH PAN FOR EPDM
PREMOLDED EPDM PIPE BOOT WITH TAPE

ALL PURPOSE BAR TERMINATION - 90 MIL EPDM
ALL PURPOSE BAR TERMINATION for EPDM
ALL PURPOSE BAR TERMINATION Z-CLIP CAP
Batten Bar with Cover Strip
DRIP APRON / GUTTER TERMINATION EPDM
DRIP APRON TERMINATION FOR EPDM
DRIP EDGE - 90 MIL EPDM
DRIP EDGE AT MANSARD FOR EPDM
GRAVEL STOP - TPO COATED METAL - OPTION 2
GRAVEL STOP TERMINATION FOR EPDM
GRAVEL STOP WITH SCUPPER FOR EPDM
GRAVEL STOP WITH SNAP LOCK FASCIA FOR EPDM
GUTTER WITH METAL FASCIA AND ALL PURPOSE BAR FOR EPDM
METAL ERA ANCHOR-TITE EDGE DETAIL - 90 MIL EPDM
METAL RETROFIT - MEMBRANE COATED DRIP EDGE WITH GUTTER FOR TPO
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR EPDM - OPTION 2
PREMANUFACTURED 2-PIECE COMPRESSION LARGE EDGE DETAIL FOR TPO
SNAP-ON FASCIA FOR TPO

FIELD SEAM FOR TPO
MEMBRANE SPLICE WITH IN-SEAM TAPE - 90 MIL
VERTICAL TERMINATION - 90 MIL EPDM
WALL FLASHING WITH CONTINUOUS MEMBRANE - 90 MIL EPDM

CURB/WALL FLASHING WITH COUNTERFLASHING FOR TPO
VERTICAL TERMINATION COUNTERFLASHING FOR EPDM
VERTICAL TERMINATION COUNTERFLASHING W/A-P BAR FOR EPDM
VERTICAL TERMINATION METAL COPING FOR EPDM
VERTICAL TERMINATION REGLET FOR EPDM
VERTICAL TERMINATION STONE COPING FOR EPDM
VERTICAL TERMINATION WITH A-P BAR FOR EPDM
WALL FLASHING WITH COUNTERFLASHING FOR TPO

EPDM BASE TIE-IN TO SHINGLE ROOF ALL PURPOSE BAR ATTACHMENT FOR EPDM
EPDM BASE TIE-IN TO SHINGLE ROOF W/RMS ATTACHMENT FOR EPDM
EPDM TIE-IN HOT STRIPPING
EPDM TIE-IN TO BUILT-UP ROOF - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - IN-SEAM TAPE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - ADHESIVE
EPDM TIE-IN TO BUILT-UP ROOF - WATERSTOP - IN-SEAM TAPE
TIE-IN - SHINGLE ROOF - 6 inch RUSS FOR TPO
TIE-IN - SHINGLE ROOF FOR TPO
TIE-IN TO EXISTING BUR / MOD BIT ROOF - RECOVER SITUATION FOR TPO
TIE-IN TO SOLID DECK WITH CURB - CURB PARALLEL TO SLOPE WITH TEAR-OFF FOR TPO

RIDGE FLASHING FOR TPO
VALLEY FLASHING - 6 inch RUSS FOR TPO - OPTION 2
VALLEY FLASHING FOR TPO - OPTION 2

Options

Item ID Description Packaging Qty per Ctn Weight per Ctn Cover Rate
08MH11685 MH LOW VOC BONDING ADH 1168 5GAL Metal Pail 1 50 60 sq.ft. per gallon