EPDM T-Joint Patches
Flashing > Patches
Used to seal field splice joints or a horizontal-to-vertical field seam transition. 40 mil (1 mm) thick uncured EPDM flashing material laminated to cured butyl rubber tape and rolled onto a poly release liner for a total thickness of 70 mils (1.75 mm). This product requires the use of Tape Primer or Low VOC Tape Primer.
Share on Facebook
Tweet this Product
Share via Email
Find a Distributor
Features & Benefits
- Pre-cut uncured flashing tape available in 6" and 12"
- Available in black only
- Required on all EPDM projects
- Must be installed with Tape Primer and Lap Sealant
Options
Item ID |
Description |
Packaging |
Qty per Ctn |
Weight per Ctn |
Coverage Rate |
08MHETJ12B |
MH EPDM T-JOINT COVERS 12X12 BLACK 20/CT |
Box |
20 |
10 lbs |
|
08MHETJ6B |
MH EPDM T-JOINT COVERS 6"X6" BLACK 20/CT |
Box |
20 |
3 lbs |
|
Videos
EPDM Blow-Out Patch
EPDM Pipe Boot
EPDM T-Joint Patch