plates

2.4” Seam Plate

2.4” Seam Plates are round Galvalume coated metal plates with (14) barbed anchors and reinforcing ribs for superior wind uplift resistance. They are designed for the mechanical attachment of the Mule-Hide Reinforced EPDM, PVC and TPO membranes. The 2.4” Seam Plates can also be used with Mule-Hide HDP Fasteners, EHD Fasteners, reinforced 6” wide RMS, or 6” wide and 10” wide RUSS™ Strip.

3” Insulation Plate

3” Insulation Plates are round Galvalume coated metal plates with reinforcing ribs for superior wind uplift resistance. They are designed specifically for the mechanical attachment of Mule-Hide Poly ISO insulation boards and other FM Approved insulation/cover boards.

drill point fasteners


Drill Point Fasteners

Drill Point Fasteners (#12) are specifically engineered to secure insulation, coverboards, and base sheets to corrugated steel (16 – 22 ga.) and wood substrates. Featuring a #2 double flute self-drilling point and exclusive tapered entry thread design, they penetrate steel quickly and offer exceptional back-out resistance. Available with #3 Phillips Head or ¼” Hex Head.

HDP Fastener

HDP Fastener (#14) is engineered to secure insulation, coverboards, base sheets and single-ply roof membrane systems to corrugated steel (16 - 22 ga.), wood, and concrete substrates. Featuring a #2 double flute self-drilling point and exclusive tapered entry thread design, they penetrate steel quickly and offer exceptional back-out resistance.

EHD Fastener

EHD Fastener (#15) is engineered for lap attachment to corrugated steel (18 – 22 ga.) and wood substrates in higher wind uplift roof assemblies. Featuring a #2 double flute self-drilling point and exclusive tapered entry thread design, they penetrate steel quickly and offer exceptional back-out resistance.

termination bars


All purpose bar

All Purpose Bar is designed for use as an anchor bar for attachment of the Mule-Hide EPDM membranes. The All Purpose Bar may be installed in the field seam as a batten bar and used at the base of curbs, parapet walls and angle changes as an anchor bar. The All Purpose Bar may also be used with any of the Mule-Hide single-ply membranes as a termination bar. This product is available in 10' lengths.

TB-75

TB-75 Termination Bar is made from special extruded aluminum without sharp edges providing a smooth sealant ledge against the roofing material. This product is available in 10' lengths.

TB-125

TB-125 Termination Bar is made from special extruded aluminum without sharp edges providing a smooth flat surface with no ledge against the roofing material. This product is available in 10' lengths.

RD-100

RD-100 Retaining Drainbar is made from special extruded aluminum without sharp edges providing a smooth sealant ledge against the roofing material and is be used with ballasted or non-ballasted systems. This product is available in 10' lengths with slotted mounting holes 6" on center and slotted drainage holes that are 4" on center.

PRe-assembled fastener system

Pre-Assembled Fastener System

Pre-Assembled Fastener System offers a simple, economical, and ergonomic "system solution" to increase the productivity in the mechanical attachment of roof insulation boards. The system includes a pre-assembled Drill Point Fastener (#12) with Phillips head style and 3" Galvalume Plate or a Drill Point Fastener (#12) with ¼” Hex head style and 3” Recessed Galvalume Plate, a Magnetic Setter Tool, 29” Stand-up Electric Power tool and a Canvas Fastener Bag (500 unit capacity)

Specialty

PFC Purlin Drill Point

PFC Purlin Drill Point (#12) is a self-drilling fastener engineered to secure single-ply roofing membrane to structural steel purlins (16 ga. to 3/16”) in standing seam metal roof recover applications. The specially designed 3/4” long pilot point prevents the existing metal roof panel from “jacking” up the threads during the drilling operation, thereby reducing point burnout and breakage.

TL Fastener

TL Fastener is designed to mechanically attach rigid insulation board and single-ply membrane to structural cement wood fiber, gypsum and lightweight insulating concrete roof decks (pull-out tests will be required). It features a high thread profile with a tapered root diameter and sharp point. Its unique design allows it to penetrate the roof deck and progressively compact the base material, creating a stronger hold in weak material. The TL Fastener is used in conjunction with the 2” TL Seam Plate and 3” TL Insulation Plate.

TL Insulation Plate and TL Seam plate

The 3" TL Insulation Plate is used in conjunction with a TL Fastener to mechanically attach rigid insulation board. The 2" TL Seam Plate is used in conjunction with a TL Fastener to attach single-ply membrane to structural cement wood fiber, gypsum and lightweight insulating concrete roof decks (pull-out tests will be required).