Water Base Bonding Adhesive, 1 gal.
or 5 gal., apply 1-sided |
100-120 sq. ft. per gal. |
| Bonding Adhesive (solvent base), 5 gal., apply 2-sided |
60 sq. ft. per gal. |
Splice Adhesive (black - 1 gal. or
5 gal., or white -1 gal.),
apply 2-sided |
50 sq. ft. per gal. |
| Black Lap Sealant, 11 oz. tube |
20 linear ft. per tube |
| 3” In-Seam Tape |
100' long rolls |
| 6” In-Seam Tape |
100' long rolls |
| Tape Primer, 1 gal., 2 ½ gal. |
200 sq. ft. per gal. |
| All Purpose Bar |
10 ft. long pieces |
| Water Cut-Off Mastic, 11 oz. tube |
20 linear ft. per tube |
| RMS (Reinforced Membrane Strip) |
6” wide x 100'
long rolls |
| RMS with 3” Tape |
6” wide x 100' long rolls |
| 6” Uncured Flashing
(black or white-on-black) |
100 linear ft. per roll |
| 12” Uncured Flashing (black or
white-on-black) |
100 linear ft. per roll |
| 6” Uncured Flashing
Tape |
100 linear ft. per roll |
| 12” Uncured Flashing Tape |
50 linear ft. per roll |
| 6” Cured Cover
Tape |
100 linear ft. per roll |
| 12” Cured Cover Tape |
100 linear ft. per roll |
| Pipe Boots with clamps 1” to
6” dia. |
1 boot per penetration |
| Pipe Boots w/Tape & clamps 1” to 6” dia. |
1 boot per penetration |
| Pourable Sealer, 1 gal. (Part A & Part
B) |
200 cubic inch per gal. |
| Pourable Sealer (Pitch) Pockets EPDM, 4”, 6” or
8” |
1 per detail |
| 3” Galvalume
Stress Plates (for insulation) |
1,000 per pail |
| Drill Point Fasteners (for Insulation only) |
1,000 per pail* |
| Heavy Duty Fasteners (for Membrane/RMS
only) |
1,000 per pail* |
| 2” Barbed Seam Plates (1 per HD
Fastener) |
1,000 per pail |
| Pre-cut Corners, 7” x 9” pieces
purchased separately |
1 per corner |
